Revision:1.0(2023-01-12)
410
• Test failure analysis
If the test result is NaN, the maintenance personnel ends the test during the test process.
If the test result is FAIL, the CPU temperature is too high.
• Troubleshooting suggestion
First check whether the air inlet and dust-proof net are blocked, whether the fans are blocked,
and whether the CPU radiator and heat-conducting cream are in good contact. If the test result
is still FAIL, replace the PC module.
Z0201 DDR Full-Space Read/Write Test
• Upper-level test item
Diagnostic Ultrasound System
Service Manual
9 Appendix
To Next Page
Loading...
Need help?
General
