84
・ FUNC−98 Zero clear
Compensated data by Zero set function, compensated data by Tare(A/Z) function, and also
compensated data by Zero tracking are cancelled.
When the key is pressed with “FUNC−98” is displayed, the display shows “ZCLR?” (At
the same time display flashes on and off). At this point, press the key when suspending
the ZERO Clear is required. Return to the Measurement mode, ZERO Clear will not
executed.
When the key is pressed during the display “ZCLR?” is flashing, “FUNC−98” display
returns. Now ZERO Clear has completed.
・ FUNC−99 Memory clear
Settings between FUNC−01 and FUNC−97 recorded on EEPROM will return to default
value.
When the key is pressed with “FUNC−99” displayed, “CLR?” display is shown
(At the same time the display flashes on and off). At this point, press the key when
suspending memory clear is required. Return to the Measurement mode, and memory clear
is not executed.
When the key is pressed during “CLR?” is flashing, the load display will put off and
after (approx.) 2 s, it will become “FUNC” display and operation of memory clear is
completed.
Warning ● Never use the following functions because they may destroy the
function of the instrument.
● Functions effective for option is installed can display and set as well
when option is not installed, however, all are ineffective.
FUNC−00
FUNC−05 FUNC−
26
FUNC−35 FUNC−44 FUNC−45 FUNC−46 FUNC−47
FUNC−48
FUNC−49 FUNC−52 FUNC−53 FUNC−57 FUNC−58 FUNC−59 FUNC−60
FUNC−61 FUNC−63 FUNC−64 FUNC−65 FUNC−66 FUNC−67 FUNC−68 FUNC−69
FUNC−70 FUNC−71 FUNC−72 FUNC−73 FUNC−74 FUNC−75 FUNC−76 FUNC−77
FUNC−78 FUNC−79 FUNC−80 FUNC−81 FUNC−82 FUNC−83 FUNC−84 FUNC−85
FUNC−86 FUNC−87 FUNC−88 FUNC−89 FUNC−90 FUNC−91 FUNC−92 FUNC−93
FUNC−94 FUNC−95 FUNC−96
To Next Page
Loading...
Need help?
General
