11. Commissioning
MiR1350 User Guide (en) 05/2022 - v.1.2 ©Copyright 2021-2022: Mobile Industrial Robots A/S. 184
NOTICE
The robot prioritizes the instructions it receives in the following
order:
1. Instructions from zones.
2. Instructions from mission actions.
3. Instructions from system settings (except instructions from the
setting Maximum allowed speed, which are never overruled by
neither zones nor mission actions).
In System > Settings, you can access the settings of the robot. Access to the
settings must be restricted by the commissioner—see Creating user groups
and users on page176.
Figure 11.24. Under System>Settings, there are several menus where you can edit your robot's
settings.
To Next Page
Loading...
