7. Battery and charging
MiR1350 User Guide (en) 05/2022 - v.1.2 ©Copyright 2021-2022: Mobile Industrial Robots A/S. 79
4. Grab the handle, and pull the battery out approximately 10 cm.
5. Connect the adapter from the cable charger directly to the battery connector.
The charger should begin humming once it starts charging the battery.
Use only an original MiR cable charger.
Once the battery has finished charging, reconnect the battery, and close the
maintenance hatch.
For information about the charging time, see specifications on the MiR website.
To Next Page
Loading...
