Mitsubishi MELSEC Q Series

5
SETTINGS AND PROCEDURES BEFORE OPERATION
5.7 Battery Specifications, Installation and Replacement
5.7.2 Installing battery
5 - 31
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
SETTING AND PROCEDURES
6
I/O NUMBER ASSIGNMENT
7
MEMORIES AND FILES
8
INSTALLING / UNINSTALLING
5.7.2 Installing battery
The battery for the C Controller module is shipped with its connector disconnected.
Connect the connector before use.
Figure 5.32 Battery installation procedure
IMPORTANT
Be sure to install the battery before starting operation.
If having operated the module without the battery, set the clock data and shutdown the
module. (
Section 5.7.4)
Completed
Put the battery connector onto the
connector pin on the case. Be sure
that the orientation is correct.
Open the C Controller module's
bottom cover.
Confirm that the battery is loaded
correctly.
Battery
Connector
Connector
stopper
C Controller module's