9 - 12
9.2 C Controller Setting Utility
9.2.1 Function list of C Controller setting utility
9
UTILITY OPERATION
9.2.1 Function list of C Controller setting utility
This section explains the functions of the C Controller setting utility.
Table9.6 Function list of C Controller setting utility
Name Description
Reference
section
Connection target setting
Sets the C Controller module to which this utility will be
connected.
9.1.3
Parameter setting file
saving/loading
Saves the parameters set on the C Controller setting
utility into a file, and loads them.
9.1.6
Module information
Displays the LED and switch statuses, error
information, and drive information of the C Controller
module.
9.2.2
Event history
Displays/saves the history of events that occurred in the
C Controller module.
9.2.3
SRAM monitor
Monitors the battery-backed-up RAM and changes and
saves the data.
9.2.4
Module monitor
Performs the following processings for the modules
installed in slots.
• Monitors the input (X), output (Y), buffer memory and
CPU shared memory statuses.
• Can execute the forced output of the output (Y) and
forced write to the buffer memory and CPU shared
memory.
• Can display the information of the C Controller
system.
9.2.5
Online operation
Performs the following processings for the C Controller
module.
• Performs parameter read/write/verification or remote
operation.
• Makes the IP address/clock/MD function/option
setting.
9.2.6
System setting
Makes the parameter setting (system setting) of the C
Controller module.
9.2.7
I/O assignment setting
Makes the parameter setting (I/O assignment setting) of
the C Controller module.
9.2.8
Multiple CPU setting
Makes the parameter setting (Multiple CPU setting) of
the C Controller module.
9.2.9
Communication
diagnostics
Diagnoses whether communication with another CPU is
available or not when the C Controller module is in a
multiple CPU configuration.
9.2.10
To Next Page
Loading...
