9 - 52
9.2 C Controller Setting Utility
9.2.10 Operating Communication diagnostics screen
9
UTILITY OPERATION
9.2.10 Operating Communication diagnostics screen
When the C Controller module is in a multiple CPU configuration, whether it can
communicate with another CPU or not is diagnosed on this screen.
POINT
1. If a communication error has occurred during connection, make the
connection target setting again.
2. Specify another CPU No. as the target CPU.
Specifying the host CPU displays the error code "19203".
Specifying a non-mounted CPU displays the error code "19200".
Figure 9.47 Communication diagnostics screen
To Next Page
Loading...
