Mitsubishi MELSEC Q Series

2
SYSTEM CONFIGURATION
2.1 System Configuration
2.1.5 Precautions for system configuration
2 - 9
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
SETTING AND PROCEDURES
6
I/O NUMBER ASSIGNMENT
7
MEMORIES AND FILES
8
INSTALLING / UNINSTALLING
2.1.5 Precautions for system configuration
This section explains the precautions for system configuration.
(1) Main base unit not applicable to the C Controller module
The following main base unit is not applicable.
• Redundant power main base unit (Q3 RB)
(2) Extension base units not applicable to the C Controller module
The following extension base units are not applicable.
• Redundant power extension base unit (Q6 RB)
• AnS series extension base unit (QA1S6 B)
Remark
Refer to Section 2.1.4 for available base units, extension cables, and power
supply modules.