A - 28
HOW TO USE THIS MANUAL
This manual describes the procedures and operations for using the C Controller module
(Q06CCPU-V-H01) in a system and provides the information that may be needed in
various stages.
Use this manual, referring to the following description.
(1) Features ( Chapter 1)
Chapter 1 describes the features of the C Controller module.
(2) System configuration ( Chapter 2)
Chapter 2 shows the system configurations that includes the C Controller module,
and lists the modules accessible from the C Controller module.
(3) Specifications and performance of C Controller module ( Chapter 3)
Chapter 3 describes the specifications and performance of the C Controller module.
(4) Functions of C Controller module ( Chapter 4)
Chapter 4 describes the functions of the C Controller module.
(5) Preparatory procedures ( Chapter 5)
Chapter 5 describes the procedures before system operation of the C Controller
module.
(6) I/O number assignment ( Chapter 6)
Chapter 6 describes the stage number setting for extension base units and the I/O
number assignment.
(7) Memory contents ( Chapter 7)
Chapter 7 describes the memories of the C Controller module.
(8) Installation and uninstallation methods ( Chapter 8)
Chapter 8 describes how to install and uninstall the C Controller module setting and
monitoring tool (SW PVC-CCPU).
(9) Utility operation methods ( Chapter 9)
Chapter 9 describes how to operate utilities.
(10)SW PVC-CCPU functions and programming procedures ( Chapter 10)
Chapter 10 describes the functions supplied by SW PVC-CCPU and their details
and programming procedures, the accessible ranges for use of the functions, and the
accessible devices.
(11)Details of multiple CPU system( Chapter 11 to Chapter 17)
Chapters 11 to 17 describe the multiple CPU system configurations, I/O numbers,
communications among programmable controller CPUs, I/O modules and intelligent
function modules, and how to start up the multiple CPU system.
(12)Errors and corrective actions ( Chapter 18)
Chapter 18 provides the corrective actions to be taken in the case of error occurrence
and the error codes that may be displayed at the time of function execution.
To Next Page
Loading...
Need help?
General
