5 - 58
5.12 Maintenance and Inspection
5
SETTINGS AND PROCEDURES BEFORE OPERATION
5.12 Maintenance and Inspection
DANGER
Do not touch the terminals while power is on.
Doing so could cause a malfunction.
Correctly connect the battery.
Also, do not charge, disassemble, heat, place in fire, short
circuit, or solder the battery.
Mishandling of the battery can cause overheating or cracks
which could result in injury and/or fires.
Be sure to shut off all phases of the external power supply
before cleaning or retightening the terminal screws.
Failure to do so may result in an electric shock, module failure
or malfunction.
If they are too loose, it may cause an accidental drop of the
module, short circuit or malfunctions.
If too tight, it may cause damage to the screws and/or module,
resulting in an accidental drop of the module, short circuit or
malfunctions.
To Next Page
Loading...
