Mitsubishi MELSEC Q Series User Manual

5
SETTINGS AND PROCEDURES BEFORE OPERATION
5.11 Login User Setting and Restrictions
5.11.1 Functions to which access can be restricted by login user setting
5 - 55
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
SETTING AND PROCEDURES
6
I/O NUMBER ASSIGNMENT
7
MEMORIES AND FILES
8
INSTALLING / UNINSTALLING
5.11 Login User Setting and Restrictions
By setting the user name and password to the C Controller module and starting it as a
login user, FTP file access and operations performed from each utility are restricted.
5.11.1 Functions to which access can be restricted by login user setting
The C Controller module can restrict the access of the following functions.
Refer to the reference section shown in the table for details.
Table5.11 Functions that can be restricted by login users
Restricted function
Access restriction Reference
section
When logged in When not logged in
FTP
/ROM (standard ROM) Read/write enabled Access disabled
Section
10.2.7
/CF (CompactFlash card) Read/write enabled Access disabled
/SYSTEMROM (system drive) Only read enabled Access disabled
Operation from C Controller setting utility Not restricted Parameter writing from
<<Online operation>>
tab disabled
Section 9.2.6
Operation from CC-Link utility Not restricted Section 9.3.4
Operation from MELSECNET/H utility Not restricted Section 9.4.5
Operation from Device monitor utility Not restricted --
Telnet function Not restricted Access disabled Section 4.16

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English