Mitsubishi MELSEC Q Series User Manual

2 - 14
2.2 Applicable Modules
2.2.2 Precautions when using I/O modules or intelligent function modules
2
SYSTEM CONFIGURATION
(2) Precautions for using GX Configurator
Take the following precautions when utilizing the intelligent function module
parameters set by GX Configurator for the C Controller setting utility.
(a) Incompatible GX Configurator
The following are GX Configurators whose intelligent function module parameters
cannot be utilized for the C Controller setting utility.
1) GX Configurator-CC
The CC-Link parameters set on GX Configurator-CC are not applicable.
Set the parameters using the CC-Link utility supplied with SW PVC-CCPU.
2) GX Configurator-SC
The parameters set on GX Configurator-SC are not applicable.
Write the parameters of the serial communication module to the buffer
memory using the bus interface function (QBF_ToBuf).
3) GX Configurator-QP
The parameters set on GX Configurator-QP are not applicable.
Write the parameters of the positioning module to the buffer memory using the
bus interface function (QBF_ToBuf).
(b) Precautions for utilizing GX Configurator parameters
The C Controller setting utility allows only the initial setting parameters to be
utilized among the intelligent function module parameters set on GX Configurator.
( Section 9.2.12)
The following are GX Configurators that can be utilized for the C Controller setting
utility.
• GX Configurator-AD
• GX Configurator-DA
• GX Configurator-CT
• GX Configurator-TC
• GX Configurator-TI
• GX Configurator-PT
• GX Configurator-FL
• GX Configurator-AS
• GX Configurator-DN

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English