Mitsubishi MELSEC Q Series User Manual

4 - 3
4.1 Function List
4
FUNCTIONS
Table4.1 C Controller module function list (Continued)
Function Description
Reference
section
Unmounting CompactFlash card
Unmounts the CompactFlash card by operating the
RESET/SELECT switch of the C Controller module.
5.4,
5.8.3
Login user access restriction
Restricts the parameter write operation/Telnet
function from FTP/each utility by setting (adding/
deleting) the login user to the C Controller module.
5.11
Module setting
monitoring from
development
environment
C Controller setting utility
Allows confirmation of the C Controller module
status (switches, error LED, event history, etc.).
Also, makes the parameter setting, communication
diagnostics, etc. of the C Controller module.
9.2
CC-Link utility
Makes the parameter setting, network monitoring,
etc. of the CC-Link module controlled by the C
Controller module.
9.3
MELSECNET/H utility
Makes the parameter setting, network monitoring,
etc. of the MELSECNET/H module controlled by the
C Controller module.
9.4
Device monitor utility
Monitors the device data of the programmable
controller CPU, etc.
9.5
Telnet function
Allows the simple remote debugging (task
information display, memory dump, etc.) of the C
Controller module from the Telnet tool of the
development environment (personal computer)
without using Tornado.
4.16

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English