7 Shipment and Storage
Use the following guidelines when receiving or storing the shipment.
7.1 Receiving and Checking the Shipment
When the shipment is received:
1. Inspect the exterior of the shipping container for any signs of damage. Immediately report any
damage to the shipping carrier.
2. Open the shipping container and check that the contents of delivery are as ordered.
Immediately report any discrepancies to Moog Casella.
3. After removing the drive from its shipping box, check that no damage has occurred during
transit. Immediately report any discrepancies to Moog Casella.
Retain all packing materials that the DM2020 system was shipped in, as those
must be used if the system components need to be sent to Moog Casella for
service. This will ensure that they arrive safely.
7.2 Storage
DM2020 system components can be stored for a consecutive period of up to one year without special
requirements or actions. If you have retained the original packing materials that the DM2020 system
was shipped in, the system components should be repackaged in those materials for safe storage.
7.2.1
R
egener
a
ti
ng the Electrolytic Capacitors after Storage
When the storage period is longer than one year, before installing and commissioning the drive, please
contact Applications Engineering to perform the regeneration procedure of the electrolytic capacitors.
PN: L-MAM2-E-201
Moog Casella DM2020 Installation and Startup Guide
7 Shipment and Storage
To Next Page
Loading...
Need help?
General
