Moog DM2020 Series User Manual

2 Safety Information
2.1 Safety and Usage Guidelines
Do not attempt to install, operate, maintain or inspect the DM2020 system until you have carefully
read this guide and the other supplied documents, and you are properly trained in the correct use of
the equipment. The DM2020 system may only be set up and operated in conjunction with this
manual and the supplied documentation.
SAFETY
FIRST
Human safety and equipment safety must be the first considerations when per-
forming the installation, operation or maintenance procedures for the drive system.
When it comes to electronics in your factory or workplace, you want to make sure
both your facility and its employees are safe. The following gives safety instructions
that must be followed when
you
are
working
on
the
D
M
2020
system.
WARNING: Risk of death or serious injury to personnel, or damage to equipment.
AVERTISSEMENT: Risque de mort ou de blessures graves pour le personnel ou de
dommages matériels.
Failure to follow the safety and usage guidelines in this chapter can result in
death or serious injury to personnel, or damage to equipment.
Ø In addition to the
DM2020 Installation and Startup Guide (the guide you are
cur-rently reading), you must read the guides listed in Related Documents
chapter.
Ø
Observe and adhere to the technical data and, in particular, the information given on the
system component nameplates.
Ø
The installation must comply with the local regulations and use of equipment and
installation practices that promote electromagnetic compatibility and safety.
Ø
Safety equipment - To protect yourself against personal injury, always wear suitable safety
equipment, such as safety glasses, work shoes, and other safety equipment required by the
operation.
2.2 Qualified Personnel
WARNING: Risk of death or serious injury to personnel, or damage to equipment. -
AVERTISSEMENT: Risque de mort ou de blessures graves pour le personnel ou de
dommages matériels.
Only qualified, properly trained and certified personnel are permitted to operate
and interact with the system.
This manual and the equipment described in it are intended only for qualified personnel who have
proper training and expertise.
Qualified personnel are those who are specialized with required knowledge and experience, who have
been trained to perform such work and are authorized to commission, systems and circuits in
accordance with established safety practices and standards. The qualified personnel must know and
observe the following standards and regulations:
PN: L-MAM2-E-201
Moog Casella DM2020 Installation and Startup Guide
2.1 Safety and Usage Guidelines
15

Moog DM2020 Series Specifications

General

Brand	Moog
Model	DM2020 Series
Category	DC Drives
Language	English