4 Certifications
4.1 CE Certificate
According to the European Community Directives, drives must conform to:
l
EMC 2014/30/EU directive
l
Low Voltage Directive 2014/35/EU
The DM2020 system has been tested in a laboratory for the verification of the parameters of
compliance with the above Directives.
Regarding electromagnetic compatibility, the DM2020 system refers to C3 industrial environments.
The DM2020 system can emit radio frequency that might interfere with non-industrial
electric and electronic devices.
The machine manufacturer MUST NOT use the DM2020 system or its components
if there is no documentation that ensures the fulfillment of the requirements of
Directive 2006/42/EC.
PN: L-MAM2-E-201
Moog Casella DM2020 Installation and Startup Guide
4.1 CE Certificate
To Next Page
Loading...
