EasyManua.ls Logo

Moor Instruments moorLDI2-VR - Page 135

Moor Instruments moorLDI2-VR
162 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MOOR INSTRUMENTS moorLDI2 RESEARCH USER MANUAL
128
High Resolution Instrument
Upto 256 x 256 pixels (actual measurements not by interpolation): 0.1mm/pixel at 20cm for
the’normal’ size scan.
LIGHTING CONDITION
Normal, ambient room lighting.
MEASUREMENTS
FLUX
Accuracy: + 10% relative to Moor Instruments 'moorLDI2 standard'
Precision: + 3% of measurement value
Range: 0-5000PU
CONC
Accuracy: + 10%
Precision: + 5% of measurement value
Range: 0-5000AU
DC
Accuracy: + 10%
Precision: + 3%
Range: 0-5000AU
CCD CAMERA
Auto Focus, Motorised 10
×
zoom. 752
×
582 Pixel Resolution.
SOFTWARE
Windows
based control, processing and analysis.
COMPUTER REQUIREMENTS
Only computers complying with IEC 950 may be used. (IEC 60950-1 Edition 1 Information
technology equipment - Safety - Part 1: General requirements). Note that generally any commercially
available PC will meet this standard. If the PC is supplied by Moor Instruments it will meet this
standard and meet or exceed the minimum recommended specification detailed below.
The minimum recommended PC requirements for running the moorLDI software are:
500 MHz processor; 512 MB RAM; 40GB HDD, CDRW Drive; mouse; keyboard; RS232 or USB*
port; display 800 x 600. A half length PCI card slot is required for the analogue CCD video camera

Table of Contents