Motorola MPC823e - Page 1120

Development Capabilities and Interface
MOTOROLA MPC823e REFERENCE MANUAL 20-59
DEVELOPMENT
20
CAPABILITIES & INTERFACE
ITLBERE—Implementation Specific Instruction TLB Error Enable
0 = Debug mode entry is disabled (reset value).
1 = Debug mode entry is enabled.
DTLBMSE—Implementation Specific Data TLB Miss Enable
0 = Debug mode entry is disabled (reset value).
1 = Debug mode entry is enabled.
DTLBERE—Implementation Specific Data TLB Error Enable
0 = Debug mode entry is disabled (reset value).
1 = Debug mode entry is enabled.
Bits 22–27—Reserved
These bits are reserved and must be set to 0.
LBRKE—Load/Store Breakpoint Interrupt Enable
0 = Debug mode entry is disabled.
1 = Debug mode entry is enabled (reset value).
IBRKE—Instruction Breakpoint Interrupt Enable
0 = Debug mode entry is disabled.
1 = Debug mode entry is enabled (reset value).
EBRKE—External Breakpoint Interrupt Enable
0 = Debug mode entry is disabled.
1 = Debug mode entry is enabled (reset value).
DPIE—Development Port Nonmaskable Request Enable
0 = Debug mode entry is disabled.
1 = Debug mode entry is enabled (reset value).