GET/SAVE/PROGRAM MTSX RSS
5-10 68P81074C50
FUNCTION KEY DESCRIPTIONS:
F1 - HELP provides useful information about the currently displayed menu, screen, or field.
F2 - CHANGE ARCHIVE function is used to specify the directory path where the archive file is to be located.
The default archive path will always be the specified default path from the SERVICE SOFTWARE
CONFIGURATION screen (F9, F3 from the MAIN MENU).
F8 - SAVE ARCHIVE function executes the save process.
F10 - EXIT moves the display backward in the RSS tree, one screen or menu at a time.
5.2.4 SAVING CODEPLUG DATA TO AN ARCHIVE FILE
RSS LOCATION: At the GET/SAVE/PROGRAM MENU, press .
MOTOROLA Radio Service Software
MTSX Model:
MAIN:GET/SAVE/PROG:SAVE FILE
Enter Archive Path.
Archive: C:\MRSS\MTSX\ARCHIVE
SAVE CODEPLUG DATA TO ARCHIVE FILE
Archive Filename ....................A466ASNO.331
Model Number ........................
Serial Number.........................466ASN0331
Last Programmed ...................9409060941
Program Source......................Factory
F1
HELP
F2
CHANGE
ARCHIVE
F3 F4 F5 F6 F7 F8
SAVE
ARCHIVE
F9 F10
EXIT
PROGRAMMING PROCEDURE:
1. Press F3 at the MAIN MENU. The GET/SAVE/PROGRAM MENU appears.
2. Press F7. The SAVE CODEPLUG DATA TO ARCHIVE FILE screen appears.
3. Select the desired function key (F1 - F10).
The SAVE ARCHIVE function is used to create (or update) an archive copy of the codeplug information onto a
diskette or hard disk.
NOTE
You are STRONGLY encouraged to make an archive copy of every radio installed or serviced in order to be able to
quickly restore customer information is case of a codeplug failure.
To Next Page
Loading...
Need help?
General
