Motorola MT 2000 User Manual

CHANGE/VIEW MTSX RSS
6-104 68P81074C50
This screen allows you to change or view parameters that pertain to an MDC system. The settings shown are
only for the system shown.
FUNCTION KEY DESCRIPTIONS:
F1 - HELP provides useful information about the currently displayed menu, screen, or field.
F2 - ADD SYS (Add System) allows you to add a system.
F3 - PREV SYS (Previous System) allows you to go to the system before the current one.
F4 - NEXT SYS (Next System) allows you to go to the system after the current one.
6.2.3.3.1 MDC SYSTEMS
RSS LOCATION: At the CHANGE/VIEW MENU, press .
MOTOROLA Radio Service Software
MTSX Model:
MAIN:CHANGE/VIEW:CONV:MDC:SYSTEM
Enter or Scroll to Select System.
MDC System............1
MDC SYSTEM
Primary ID..............................................0001 Emergency ..................................Enabled
Secondary ID.................................00000000 Emergency Type................Alarm and Call
Variable ID ..............................................000 Emer PTT ID Sidetone..............Enabled
Leading PTT-ID ................................Enabled Acknowledge Alert Tone...........Enabled
PTT-ID Sidetone ...........................Disabled
Trailing PTT-ID ................................Disabled Revert Table
Radio Check ....................................Disabled
Radio Inhibit.....................................Disabled Num Zone Channel
Status ...............................................Enabled 1 1 1
Status Request................................Disabled 2 1 1
Message..........................................Disabled 3 1 1
F1
HELP
F2
ADD
SYS
F3
PREV
SYS
F4
NEXT
SYS
F5
DELETE
SYS
F6 F7
MORE EMER
OPTIONS
F8 F9
MORE
OPTIONS
F10
EXIT
PROGRAMMING PROCEDURE:
1. Press F4 at the MAIN MENU. The CHANGE/VIEW MENU appears.
2. Press F6. The CONVENTIONAL MENU appears.
3. Press F4. The MDC CONFIGURATION MENU screen appears.
4. Press F3. The MDC SYSTEM screen appears.
5. Press Tab to select the desired field, or press the desired function key (F1 - F10).
6. If a field is selected, press the UP/DOWN arrow keys to select choice or value.
F4
F6
F3

Motorola MT 2000 Specifications

General

Brand	Motorola
Model	MT 2000
Category	Software
Language	English