GETTING STARTED MTSX RSS
2-30 68P81074C50
2.10.1 Setting Default Archive and Backup Paths
First, you can set the drive name and path names for archive files you will create later. Specifying a default path
name here will save much typing time later every time you go to save an archive file. Here’s how to set the
default archive and backup file paths.
Table 2-10. Creating Archive File Paths
Instruction What to Type Explanation
1. GO to CONFIGURE
COMPUTER
2. Specify archive file path C:\MRSS\MTSX\ARCHIVE
3. Save this configuration
Press F3 at the SERVICE SOFTWARE
COMPUTER CONFIGURATION MENU to get
to CONFIGURE COMPUTER.
At CONFIGURE COMPUTER, type this
archive file path name if you have a hard disk.
This is where you will keep your radio archive
files. If you don’t keep archive files on your
hard disk, specify (one of) your diskette
drive(s).
F8 saves the field options displayed on the
screen.
To Next Page
Loading...
Need help?
General
