Motorola MT 2000 User Manual

MTSX RSS CHANGE/VIEW
68P81074C50 6-109
6.2.3.3.2.1 MDC SYSTEM OPTIONS
RSS LOCATION At the CHANGE/VIEW MENU, press .
MOTOROLA Radio Service Software
MTSX Model:
...CONV:MDC:SYSTEMS:OPTIONS
Use UP/DOWN Arrows to Select Choice.
MDC System................1
MDC SYSTEM OPTIONS
System Pretime (ms) ...............................500 Emergency
Preamble During Pretime ................Disabled Polite Retries........................................5
Inter-Packet Time (ms) ............................100 Impolite Retries ..................................15
Limited Patience (sec) ...............................60 Emer Priority Tx Inhibit.............Disabled
Emer Limited Patience (sec) .............0
DOS (Data Squelch).........................Enabled
Operation..............................1200/1800 Hz RAC (Repeater Access Code
Coast Time (ms) .................................1500 Pretime (ms).......................................200
Sel Call Reset.............................Auto w/Carr Ack Alert Tone.............................Enabled
Auto Reset Time (sec)..............................5 Preambles ..............................................1
Sidetone......................................Enabled
F1
HELP
F2 F3
PREV
SYS
F4
NEXT
SYS
F5 F6 F7 F8 F9
MDC SYS
REMOTE
F10
EXIT
F4
F6
F9
F3
This screen contains more options for MDC systems.
FUNCTION KEY DESCRIPTIONS:
F1 - HELP provides useful information about the currently displayed menu, screen, or field.
F3 - PREV SYS (Previous System) allows you to go to the system before the current one.
F4 - NEXT SYS (Next System) allows you to go to the system after the current one.
F9 - MDC SYS (MDC System) MDC SYS REMOTE is used to change and view parameters associated with
MDC System Remote Monitor/Radio Trace features.
F10 - EXIT moves the display backward in the RSS tree, one screen or menu at a time.
Fields are defined on the following page.
PROGRAMMING PROCEDURE:
1. Press F4 at the MAIN MENU. The CHANGE/VIEW MENU appears.
2. Press F6. The CONVENTIONAL MENU appears.
3. Press F4. The MDC CONFIGURATION MENU screen appears.
4. Press F3. The MDC SYSTEM screen appears.
5. Press F9. The MDC SYSTEM OPTIONS screen appears.
6. Press Tab to select the desired field, or press the desired function key (F1 - F10).
7. If a field is selected, press the UP/DOWN arrow keys to select choice or value.

Motorola MT 2000 Specifications

General

Brand	Motorola
Model	MT 2000
Category	Software
Language	English