3-22 68P81074C50
TUTORIAL MTSX RSS
3.3.13 Program the Zone/Channel Features Next
Now that the personalities are programmed, we'll assign them to switch positions using the Zone/Channel screen.
Instruction What to Type How to do it/What it Means
Table 3-20. Steps to Program Zone/Channel Features
From the Change/View menu, press F8 to see
the Zone/ (Channel) Assignment screen
Press F2 to add a Zone.
Pressing F3 takes you back to Zone 1.
Pressing F6 repeatedly will add additional
channels.
Pressing Tab advances the prompt to the
Personality Type field.
Press up/down arrow keys to select "Trunk".
Press Enter or Tab to advance to Personality
Number field.
Repeat steps 6 and 7 for additional Channel
numbers.
Press F4 to go Next Zone.
Press F10 to exit to Change/View Menu.
1. Go to Zone/Channel
Assignment screen
2. Add a Zone
3. Go to Previous Zone
4. Add desired number of
channels
5. Go to Personality Type field
6. Select "Trunk"
7. Go to Personality Number
8. Enter desired Personality
Number
9. Go to Next Zone
10. Repeat steps 4 through 9 for
each Zone
11. Exit to Change/View Menu
To Next Page
Loading...
Need help?
General
