3-8 68P81074C50
TUTORIAL MTSX RSS
Table 3-7. Steps to Program Conventional Personalties
Instruction What to Type How to do it/What it Means
1. Go to Conventional menu
2. Go to Conventional Personalty
screen
3. Add new personalities. Return to
Personality 1
4. Tab to Scan List
5. Select appropriate scan list "1"
6. Go to Phone Operation
7. Select None/Unlimited or List Only
8. Go to Receive Frequency field
9. Enter frequency data
10. Go to Receive Squelch Type field
11. Make selection (PL)
12. Go to Code field
13. Enter Code
14. Go to Transmit Frequency field
15. Enter frequency data
16. Go to Transmit Squelch Type field
17. Repeat steps 11 through 13 for
Transmit field.
18. Go to next Personality
19. Repeat steps 4 through 18 for
additional personalities.
20. Go to Change/View Menu
From the Change/View menu, press F6 to
see Conventional menu.
Personality will be highlighted.
Pressing F2 repeatedly will add desired
number of personalities. Press F4 to return
to Personality 1.
Press Tab to advance to Scan List field.
Press up/down arrow keys to select "1".
Pressing Tab advances the prompt to the
next field.
Press up/down arrow keys to scroll for
choices.
Pressing Tab advances the prompt to the
next field.
Enter frequency data via keyboard or
up/down arrow keys.
Pressing Tab advances the prompt to the
next field.
Press up/down arrow keys to select TPL,
DPL, or CSQ. Or enter PL via the
keyboard.
Pressing Tab advances the prompt to the
next field.
Press up/down arrow keys to scroll for
choices, or enter code via the keyboard.
Pressing Tab advances the prompt to the
next field.
Press up/down arrow keys to select PL.
Pressing Tab advances the prompt to the
next field.
Press F4 to advance to next personality.
Press F10 twice to go to Change/View Menu.
To Next Page
Loading...
Need help?
General
