CHANGE/VIEW MTSX RSS
6-82 68P81074C50
MOTOROLA Radio Service Software
MTSX Model:
MAIN:CHANGE/VIEW:CONV
Select Function Key F1 - F10.
CONVENTIONAL MENU
F1 - HELP
F2 - Conventional Radio Wide Configuration
F3 - Conventional Personalities, Options
F4 - MDC Systems, Options, Call List
F5 -
F6 -
F7 - Auxiliary Systems
F8 - Conventional Message Alias List
F9 - Conventional Status Alias List
F10 - EXIT
F1
HELP
F2
CONV
WIDE OPT
F3
CONV
PERS
F4
MDC
CONFIG
F5 F6 F7
AUX
SYSTEM
F8
MSG
ALIAS
F9
STATUS
ALIAS
F10
EXIT
FUNCTION KEY DESCRIPTIONS:
F1 - HELP provides useful information about the currently displayed menu, screen, or field.
F2 - CONV WIDE OPT (Conventional Radio Wide Options) This screen holds the fields that are pertinent to all
the conventional channels in the radio, such as monitor type.
F3 - CONV PERS (Conventional Personalities) This screen is used to define the conventional frequencies,
coded squelch type (PL/DPL), and to define conventional options (phone, scan, etc.) and signalling (MDC)
permitted on each channel.
F4 - MDC SYSTEM This screen is used to define the MDC signalling configurations of each conventional
personality. Each system can be defined with a unique PTT ID, emergency operation, and signalling timing
options. This function will only be active when a radio with MDC capabilities has been read. Not all radios
have this capability.
F7 - AUX SYSTEM (Auxiliary System)
This menu contains the advanced Conventional Signalling features that are in addition to MDC, such as
Quick-Call II, GE Star, Singletone etc. This function will only be active when a radio with these signalling
capabilities has been read.
6.2.3 CONVENTIONAL MENU
RSS LOCATION: At the CHANGE/VIEW MENU, press .
PROGRAMMING PROCEDURE:
1. Press F4 at the MAIN MENU. The CHANGE/VIEW MENU appears.
2. Press F6. The CONVENTIONAL MENU appears.
3. Select the desired function key (F1 - F10).
This screen allows you to navigate to the conventional edit screens. The options in these menus pertain only to
conventional radio features.
To Next Page
Loading...
