Motorola MT 2000 - Program a Talkgroup Scan with One List; Steps to Program Talkgroup Scan with One Lis

3-20 68P81074C50
TUTORIAL MTSX RSS
Table 3-18. Steps to Program Talkgroup Scan with One List
Instruction What to Type How to do it/What it Means
Press F5 at the Radio Wide Configuration Menu to
see Scan List screen.
If not already highlighted, press Tab to advance the
prompt to Scan Type field.
Press up/down arrow keys to select Talkgroup Scan.
Note: This is necessary to allow the Scan List to be
referenced by a trunked personality.
Press F10 twice to exit to Change/View Menu.
1. Go to Scan List screen
2. Go to Scan Type field
3. Select Talkgroup Scan
4. Exit to Change/View Menu
TAB
3.3.11 Program Talkgroup Scan with One List
Table 3-18 provides the steps required to program Talkgroup scan with one list.
F5
F10
F10