MTSX RSS CHANGE/VIEW
68P81074C50 6-21
Trunk Item
Use the UP/DOWN arrow keys to select Menu functions.
Use F7 to add, and F9 to delete trunked items. Depending on your radio version and model number, you will be
able to choose from all or some of the functions listed below.
CALL Select Private Call ID (2)
CHAN/SUB Select/Change Channels or Subfleets.
BLANK No Function. No tone will sound.
MSG Select Message to be transmitted (2)
MUTE Enable/Disable the keypad beeps
PAGE Select Call Alert ID (2)
PHON Select DTMF Phone Number to be transmitted (2)
PROG Change Phone/Private Call/Scan lists (2)
PSWD Change Radio Lock Password (3)
PWR Enable/Disable Tx Low Power
RPGM Enable/Disable Reprogram Request
SCAN Enable/Disable Channel Scan (2)
SITE Change AMSS or SmartZone Site (1)
STS Select Status to be transmitted. [2]
VIEW View Phone/Private Call/Scan lists (2)
ZONE/SYS Select/Change zones
NOTES
[1] For radio to function properly, this feature must also be enabled on the Trunking
System screen (F4/F4/F3).
[2] For radio to function properly, this feature must also be enabled on the Trunking
Personality screen (F4/F4/F4)
[3] For radio to function properly, this feature must also be enabled on the Radio Wide
Display Options screen (F4/F3/F6).
* For PSWD to show on RADIO WIDE DISPLAY OPTIONS screen, RADIO LOCK
must be enabled.
[4] The radio display shows 3 valid menu items per screen. When programmed menu
items are not applicable for a specific zone/channel combination, the menu items will
be discarded.
WARNING
THE RADIO DISPLAY MUST CONTAIN AT LEAST 1 VALID, NON-
BLANK MENU ITEM. Failure to do so may result in improper behavior of
the radio.