CHANGE/VIEW MTSX RSS
6-36 68P81074C50
Auto Light
When enabled, this option causes the display to light each time a button or key is pressed (except for PTT). The
light will time out per the Display Light Time just as if the light button had been pressed. Factory default is
Disabled.
Emergency Receive
If Enabled, the radio display will alternate between 'EMER RECEIVED' and the current channel when it unmutes
on an emergency call. For 6 character display models, 'EMGRCV' will be displayed. This feature is not
compatible with Silent Emergency. Emergency must be enabled on each Trunking personality (F4/F4/F4/F8) if
your radio supports the emergency feature. Factory default is Disabled.
Display Sys/Sub
Use the UP/DOWN arrow keys to Enable SYS/SUB mnemonics to be displayed on the radio menu instead of
ZONE/CHAN.
This feature permits customization of trunking applications to minimize user training. The factory default depends
on the model.
Backlight While in MTVA
Use the UP/DOWN arrow keys to select Enabled or Disabled.
When this feature is Enabled, the backlight on the radio will be continuously on while it is in the MTVA. Any key
press that would normally affect the status of the backlight will be ignored. When the radio is removed from the
MTVA, the backlight will turn off, and button presses affecting it will resume normal operation. When this feature
is Disabled, the MTVA will not affect backlight operation. The factory default is Disabled.
Radio Lock
When this field is enabled, the user will be required to enter the Radio Lock Password on power-up before using
the radio. In order to use this feature, a PSWD function must also be enabled on the Radio Wide Menu screen
(F4/F3/F3/F4). Factory default is Disabled.
Mandatory Password
When this field is enabled, the user must enter a password each time the radio is turned on. If this option is
disabled, the user may avoid entering a password by changing it to NULL. (See Radio Operator's Manual).
Factory default is Disabled.
Max Password Length
This is the maximum length a password is allowed to have. The radio uses this value only when the password
function is enabled on a button. This field is only applicable when the Radio Lock feature is enabled. Valid
entries are 1 to 8 characters. Factory default is 8.
Password
When this field is selected you would enter your password, up to 8 characters. Enter the numeric Password
directly from the keyboard. The password is the numeric value which must be entered when the radio is turned
on (when the radio lock feature is Enabled). The factory Default is NULL.
To Next Page
Loading...
Need help?
General
