CHANGE/VIEW MTSX RSS
6-102 68P81074C50
FIELD DEFINITIONS:
Repeater Access
Use the UP/DOWN arrow keys to select the desired conventional personality. The number may also be entered
directly.
This option enables Repeater Access on this personality. Repeater Access is used to access a repeater.
Typically, upon receiving Repeater Access Codeword the repeater will remain in repeat mode until the hang time
expires. See help screen for extensive information.
Tone Signalling System
Use the UP/DOWN arrow keys to select the tone signalling system to be used by this personality.
The factory default is 1.
Access Strapping
Use the UP/DOWN arrow keys to select the Repeater Access strapping, or Mode Slaved for this personality.
The factory default is Mode Slaved.
Access Type
Use the UP/DOWN arrow keys to select the Repeater Access Type. Choices will be Manual RAC or Auto RAC.
The factory default is Manual RAC.
RAB 1 Code Type
Use the UP/DOWN arrow keys to select the Repeater Access Button operation. Depending on your radio
capabilities, choices will be Singletone, DTMF or MDC.
The factory default is Singletone.
RAB 1 Singletone (Hz)
For Singletone and MDC, enter the index from the Singletone List or the MDC repeater ID List.
For DTMF enter the tone value, DTMF Tone values are 0-9, * and #.
Optionally, the UP/Down arrow keys could be used to scroll through indexes/values.
The factory default for Singletone will be 300Hz, for DTMF will be zero and for MDC will be 1.
RAB 2 Code Type
Use the UP/DOWN arrow keys to select the Repeater Access Button operation. Depending on your radio
capabilities, choices will be Singletone, DTMF, MDC or None.
The factory default is None.
RAB 2 Singletone (Hz)
For Singletone and MDC, enter the index from the Singletone List or the MDC repeater ID List.
For DTMF enter the tone value, DTMF Tone values are 0-9, * and #.
Optionally, the UP/DOWN arrow keys could be used to scroll through indexes/values.
The factory default for Singletone will be 300Hz, for DTMF will be zero and for MDC will be 1.
To Next Page
Loading...
Need help?
General
