GETTING STARTED MTSX RSS
2-34 68P81074C50
F4 - CHANGE/VIEW is a multi-level menu that is used to change, view, or modify codeplug features and option
configurations. All radio codeplug parameters are classified as either RADIO-WIDE, CONVENTIONAL,
TRUNKED, or PERSONALITY related. CHANGE/VIEW permits access to each of these categories. Unlike
the SERVICE function, a codeplug must be loaded into the computers memory, via GET/SAVE functions,
before CHANGE/VIEW functions can be accessed. An archive file can be accessed without a radio being
connected.
F5 - PRINT MENU will print selected codeplug data.
F6 - FILE MAINTENANCE is available to allow some file manipulation capability without exiting the RSS. New
directories can be created and files can be deleted from this screen.
F8- FLASHPORT UPGRADE is a multi-level menu that is used to view the radio’s configuration, to view the
FLASHkey’s contents, to upgrade the codeplug, and to FLASH the radio.
F9 - SETUP is used to configure the the Radio Service Software to the users particular application. Archive path
names, communication ports, and even screen colors may be customized to the customer’s specific needs.
F10 - EXIT is used to quit the program and return to DOS. Ensure that all desired codeplug changes have been
programmed back to the radio and that an archive copy has been made. If this is not done, all changes will
be lost as returning to DOS erases this data from the computer’s memory.
To Next Page
Loading...
Need help?
General
