Journal Printer
How to Replenish the Graphics Journal Printer Paper
NCR Personas M Series 5887 Operator Manual 5-7
18 Check that the paper is not too close to one side or it may
crumple against the roll guides and cause a jam. Open the print
mechanism and slide the paper until it is centred between the
guides. Close the print mechanism. The “smiley” graphic should
be printed again.
19 Push the printer back into the ATM until it clicks into place.
20 Follow your in-house procedures for indicating that the paper
has been replaced in the journal printer.
21 If your ATM does not have the auto-supervisor option, press the
switch on the operator panel to the normal position.
22 Close and lock the exterior of the ATM.
To Next Page
Loading...
