Journal Printer
How to Replenish the Graphics Journal Printer Paper
5-6 NCR Personas M Series 5887 Operator Manual
15 Close the print mechanism, making sure that it clicks shut. A
test graphic will be printed automatically:
● A “smiley” graphic indicates correct operation.
● A picture of the printer with a paper core being removed
indicates that the empty paper core was left in the printer
and is still under the new paper roll. Lift out the paper,
remove the empty core and replace the paper.
16 Press the paper feed button to wind on the paper until all slack
is taken up and the test graphic has disappeared onto the take-
up roll.
17 If nothing is printed on the paper when the print mechanism is
closed, the paper has probably been loaded incorrectly. Check
the orientation of the paper supply roll as shown in Step 9 and
try Steps 10 through to 16 again.
To Next Page
Loading...
