: Default
BASIC SERVICE SETTING DATA
516 Whether the system override IP Stations which have the same
station number when the IP Stations login to the network
NOTE: Set the second data to 0, when an IP Station user moves
to visitor unit without the logout operation in User Mo-
bility feature.
0
1
To override
Not overridden
517 Encoding method for the password
NOTE: Effective when CM08>515 is set to 1.
0
1
MD5
NEC Original method
519 Whether the system sends SPDT when entering the name/num-
ber for Dial by Name
0
1
Not sent
To send
521 PS Location Indication on DESKCON display
[8300R2]
0
1
To provide
Not provided
522 Provide the Privacy Release feature which does not use My line
of the third party
0
1
To provide
Not provided
524 Send calling party name to the analog telephone for Caller ID-
Station when an internal call is terminated
NOTE: This data is effective only when the 2nd data of CM12
Y=20 is set to 1.
[North America Only]
0
1
To send
(Calling Party Name is sent)
Not sent
(Calling Party Number is sent)
525 Sending Switch Hook Flash for Adjunct Analog System 0
1
To send
Not sent
527 Provide the system with the voice communication between
ISDN telephone group and Single Line Telephone/Multiline
Terminal/PS within the system
0
1
To provide
Not provided
534 System operation after the C.O./Tie line (via TRK-B) is com-
pleted when a station that has a C.O./Tie line call (via TRK-A)
on consultation hold is talking with another C.O./Tie line call
(via TRK-B)
0
1
Return to the original call
(via TRK-A)
ROT
538 Duration of displaying the destination information (called num-
ber/name) indicated on the Multiline Terminal/DESKCON
when the outgoing call is answered by the destination (except
CCIS)
NOTE: Set this data by CM08>580 when making a call via
CCIS.
0
1
Until call is finished
6 seconds
Continued on next page
To Next Page
Loading...
