: Default
BASIC SERVICE SETTING DATA
542 Type of Camp-On from DESKCON
[8300R2]
0
1
Semi-Automatic Camp-On
Automatic Camp-On
543 Whether the step call is to be restricted or not 0
1
Restricted
Allow
548 Selection of the Guest information displayed on an administra-
tive station (Multiline Terminal/Attendant Console) for 8 char-
acters display in left-side on upper line of LCD
0
1
Display PMS information A/B
Display VIP/language
549 Whether the PMS information for 8 characters display in left-
side on upper line of LCD is to be displayed on Attendant Con-
sole or not
[8300R2]
0
1
Display information assigned by
CM08>548
Not displayed
553 Inquiry Dial Tone sent to a station makes SHF on Consultation
Hold
[For EU]
0
1
DT
SPDT
554 Displaying the calling information on PS when an Attendant
Console calls a PS with consultation holding the other station/
trunk
[8300R2]
0
1
Information of holding call
(Station/Trunk information)
Information of Attendant Console
555 Displaying the calling information on PS when a station calls a
PS with consultation holding the other station/trunk
[8300R2]
0
1
Information of holding call
(Station/Trunk information)
Information of calling station
assigned by CM60 Y=51
556 Displaying the calling information on PS when a call is termi-
nated from an individual signal line trunk
[8300R2]
0
1
Trunk name assigned by CM77 Y=2/
CM77 Y=3
Not displayed
557 Operation of Group Feature Key on Multiline Terminal when
an incoming call/holding call cannot be seized with My line
because it is used by the other Multiline Terminal on multiline
0
1
Group Feature Key is available by
seizing Sub line
Group Feature Key is unavailable
558 Group Feature Key on Multiline Terminal with Line Preselec-
tion function
NOTE: Set the second data of CM08>199 to 0 when the second
data of this Command is set to 0.
0
1
To provide
Not provided
Continued on next page
To Next Page
Loading...
