EasyManua.ls Logo

NEC Univerge SV8300 - Page 122

NEC Univerge SV8300
804 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-66 NWA-033623-001 Rev.8.1
91ch3001.fm
COMMAND CODE
TITLE:
BASIC SERVICES
08
: Default
BASIC SERVICE SETTING DATA
560 Action of monitoring station after the hold/hooking key is
pressed in the monitored station or the monitored station
becomes idle
0
1
Keep monitoring
Stop monitoring
563 Information to display on the middle line of the Multiline Ter-
minal/DESKCON LCD when forwarding a trunk call to the
Multiline Terminal/DESKCON by Call Forwarding-All Calls/
No Answer/Busy Line/Not Available
0
1
Forwarding station name
Caller ID
(Calling number/Calling name)
564 Display the first forwarding station number via CCIS or the
second forwarding station number of own office on LCD of for-
warding destination Multiline Terminal
0
1
The first forwarding number via CCIS
The second forwarding number of
own office
567 Automatic Idle Return in case the PBR time out occurs after the
Redial/Speaker key is pressed with the Multiline Terminal in
on-hook condition
0
1
Not available
Available
NOTE: This command is effective only when CM08>172 is set to “1”.
570 Whether the Single Digit Feature Access Code is fixed or not 0
1
Programmable Access Code assigned
by CM20 Y=4, 5
Fixed Access Code
576 Attendant/Station Night Transfer when a station/trunk call is
terminated to Attendant Position/station that Night mode is set
0
1
To provide
Not provided
577 Changing the ringing tone depend on Day Mode/Night Mode
Change
0
1
To provide
Not provided
578 Use of Record key assigned by CM90 Y=00: F5026 for Voice
Mail Live Record-CCIS
[8300R5]
0
1
Used as Record key and End key
Used as Record key
579 Sending of confirmation tone from VMS to the calling and
called party while Voice Mail Live Record-CCIS is executed
[8300R5]
0
1
To send
Not sent
580 Duration of displaying the caller information (calling number/
name) indicated on Multiline Terminal/DESKCON when the
incoming call is answered (effective for all trunks)
0
1
6 seconds
Until call is finished
NOTE: When making a call via CCIS, the duration of displaying the destination information when the outgoing
call is answered, is selected by this command.
Continued on next page
JANUARY/14/2011
CM08

Table of Contents

Other manuals for NEC Univerge SV8300

Related product manuals