: Default
BASIC SERVICE SETTING DATA
633 Trunk access code display when a call terminates via ETSI
ISDN
[For EU]
0
1
Available
Not available
644 ETSI ISDN Overlap Sending
[For EU]
0
1
To provide
Not provided
649 Ringing cadence on SIP trunk DID call assigned by CM76
Y=22, 23/CM35 Y=033, 034
0
1
To provide
Not provided
655 Operation when the PBR/T302 time out occurs
[Russia Only]
0
1
Stop connecting
Keep connecting
664 Operation of hooking/call holding after a station receives warn-
ing SST for forced disconnection
0
1
Allow
Restricted
665 Shift from the communication between station and Trunk to
Three Way Calling (Conference [Three/Four Party]) with the
Timer for forced disconnection is in progress
0
1
Allow
Restricted
666 Alternative Routing when no answer timer of outgoing call (T1
timer) time-out occurs in tandem connection (CCIS to CCIS)
0
1
To provide (CGC sending)
Not provided (CFL sending)
669 Sending the station status type to the destination office when
the Multiline Terminal/DESKCON calls a station set the DND
over CCIS
0
1
To send DND setting
To send the restriction
675 Selecting the mailbox number to hear a message when the Play
key for Voice Mail Live Record-CCIS is pressed while seizing a
sub line
[8300R5]
0
1
Mailbox number for My Line
Mailbox number for Sub Line
676 Output message which is sent from PBX to ISDN network
when the 2nd line is released by Mobility Access hooking
0
1
As per CM08>677
CALL PROC + DISC
677 Output message which is sent from PBX to ISDN network
when the 2nd line is released by Mobility Access hooking
NOTE: This data is effective only when the 2nd data of
CM08>676 is set to 0.
0
1
CALL PROC + ALERT + DISC
CALL PROC + ALERT +
CONNECT + DISC
685 Send DTMF signals to the other office station/trunk when the
connection between DT700 Series via IPT (P2P CCIS) and
other office station/trunk is established.
0
1
To send
Not sent
Continued on next page
To Next Page
Loading...
