: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
011 Toll Restriction 0
3
To provide
Not provided
CM81, CM8A
CM85
CM35 Y=076
012 Number of digits to be
received on DID for Devel-
opment Table 0
0
1
2
3
1 digit
2 digits
3 digits
4 digits
CM76
CM35 Y=018
CM35 Y=170
013 Maximum number of send-
ing digits allowed on outgo-
ing connection
For C.O. trunks, data assign-
ment is not required.
NONE
000
001
002
003
004
005
254
Ordinary TRK
Radio Paging TRK
Determined by 2 digit + STN
CM35 Y=076 NOTE 1 NOTE 2
– Only dialed No. is sent
1 digit 1 digit + STN
2 digits 2 digits + STN
3 digits 3 digits + STN
4 digits 4 digits + STN
5 digits
2 digits + STN
254 digits
NOTE 1: When CM35 Y=076 is set to 15, this
data setting is not required (release
the sender by time out or by answer
signal from the called distant office).
When CM35 Y=076 is set to 00-04,
specify the dialed digits which is
assigned by CM85.
NOTE 2: STN means the calling party’s
station number, and this number is
sent automatically by CM30 Y=28:
x6.
CM30 Y=28
CM35 Y=076
014 SMDR/Centralized-Billing-
CCIS for outgoing call
0
1
Not provided
To provide
Continued on next page
To Next Page
Loading...
