: Default
Y
1ST DATA
2ND DATA
REMARKS
No. MEANING DATA MEANING
38 Interval of SLT/
Multiline Termi-
nal ringing tone
for DID incoming
call with no CLI
000-999:
Number
Conversion
Block No.
assigned by
CM76 Y=00/90
0
1
2
3
Ringing NOTE3
See CM08>397
Special Ringing
See CM08>397
Internal Ringing
See CM08>397
As per CM35 Y=033
[Other than North America]
CM08>397
CM35 Y=033
CM76 Y=34,
36
0
1
2
3
0.5 seconds ON-0.5 seconds OFF
(Multiline Terminal)
1 second ON-2 seconds OFF (SLT)
0.5 seconds ON-0.5 seconds OFF
-0.5 seconds ON-1.5 seconds OFF
(Multiline Terminal)
0.4 seconds ON-0.2 seconds OFF
-0.4 seconds ON-2 seconds OFF
(SLT)
1 second ON-2 second OFF
(Multiline Terminal or SLT)
As per CM35 Y=033
[North America Only]
NOTE 1: Assign this command when the terminal destination is SLT or Multiline Terminal.
NOTE 2: This command is effective when CM76 Y=34, 36 is set to 0 or 2.
NOTE 3: For SLT, Internal Ringing is applied. For Multiline Terminal, Special Ringing; 0.5 seconds ON-0.5
seconds OFF [For Australia/Asia/Africa/Europe/Latin America/Middle East/Russia] or
0.25 seconds ON-0.25 seconds OFF-0.25 seconds ON-0.25 seconds OFF [For EU] is applied.
Continued on next page
To Next Page
Loading...
