: Default
Y
1ST DATA
2ND DATA
REMARKS
No. MEANING DATA MEANING
39 Multiline Termi-
nal Ringer Tone
Pattern for DID
incoming call
with no CLI
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
0
1
2
3
4
5
6
7
Ringer Tone Pattern 0
Ringer Tone Pattern 1
Ringer Tone Pattern 2
Ringer Tone Pattern 3
Ringer Tone Pattern 4
Ringer Tone Pattern 5
Ringer Tone Pattern 6
As per CM76 Y=23
CM65 Y=40
CM76 Y=23,
34, 36
NOTE 1: This command is effective when CM76 Y=34, 36 is set to 0 or 2, and Multiline Terminal receives the
incoming call.
NOTE 2: For details of the Ringer Tone Pattern see CM65 Y=40.
40 Kind of call
termination
indicator key/
lamp on Atten-
dant console for
DID incoming
call with no CLI
[8300R2]
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
0
1
6
7
C.O. Incoming Call 0
C.O. Incoming Call 1
C.O. Incoming Call 6
As per CM35 Y=015
CM35
Y=015
CM76 Y=34,
36
NOTE: The command is effective when CM76 Y=34, 36 is set to 0, and the destination of call forwarding is
Attendant console.
41 Mobility Access
function to each
DID number
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
0
1
2
3
4
5
7
To use Mobility Access Termination
To set Mobility Access mode
(Trunk Access Code 1)
To cancel Mobility Access mode
To set Mobility Access mode
(Trunk Access Code 2)
[8300R6]
To set Mobility Access mode
(Trunk Access Code 3)
[8300R6]
To set Mobility Access mode
(Trunk Access Code 4)
[8300R6]
Mobility Access function is not used
CM15
Y=216
CM64 Y=10,
14-16
Continued on next page
To Next Page
Loading...
