c. Plug in your modem router’s power and turn on your modem router.
d. Wait two minutes.
e. Select the I just power cycled the modem and waited for 2 minutes radio button.
f. Click the Next button.
• For a cable connection, see if the Ethernet cable is not fully inserted or is inserted at the wrong place.
If necessary, do the following:
a. Fully insert the Ethernet cable in the correct port on the cable modem and in the red Internet
port on the modem router.
b. Select the I corrected a problem with the Ethernet cable radio button.
c. Click the Next button.
• If you do not need to power cycle the modem router or the Ethernet cable is already fully inserted in
the correct ports, do the following:
a. Select the None of the above radio button.
b. Click the Next button.
12. (Only if the page in the following figure displays) Specify how to manage problems with the detection
of the IP address for the Internet connection.
The page that might display states that a problem occurred while the wizard was detecting the Internet
connection IP address. If this page does not display, continue with Step 13.
Take one of the following actions:
• If your ISP assigned you a fixed (static) IP address, do the following:
Manage the Internet Settings Manually
39
AC1200 WiFi VDSL/ADSL Modem Router Model D6220
To Next Page
Loading...
Need help?
General
Weight and Dimensions
