NETGEAR M4100 Series User Manual

Configure System Information
113
M4100 Series Managed Switch
7. Select System  ISDP  Advanced  Statistics.
The following table describes the ISDP Statistics fields.
Table 35. ISDP statistics
Field Description
ISDP Packets Received Displays the ISDP packets received including ISDPv1 and ISDPv2
packets.
ISDP Packets Transmitted Displays the ISDP packets transmitted including ISDPv1 and ISDPv2
packets.
ISDPv1 Packets Received Displays the ISDPv1 packets received.
ISDPv1 Packets Transmitted Displays the ISDPv1 packets transmitted.
ISDPv2 Packets Received Displays the ISDPv2 packets received.
ISDPv2 Packets Transmitted Displays the ISDPv2 packets transmitted.
ISDP Bad Header Displays the ISDP bad packets received.
ISDP Checksum Error Displays the number of the checksum error.
ISDP Transmission Failure Displays the number of the transmission failure.
ISDP Invalid Format Displays the number of the invalid format ISDP packets received.
ISDP Table Full Displays the table size of the ISDP table.
ISDP Ip Address Table Full Displays the table size of the ISDP IP address table.

NETGEAR M4100 Series Specifications

General

Model	M4100 Series
Switch Type	Managed
Form Factor	Rack-mountable
Port Configuration	24 or 48 ports
Ethernet Ports	10/100/1000 Mbps
PoE Support	Available on some models (PoE and PoE+)
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
QoS	Yes
Stackable	Yes
Ports	24 or 48
Jumbo Frame Support	Yes
Security Features	ACL, 802.1X, RADIUS, TACACS+
Operating Temperature	0° to 50° C (32° to 122° F)
Storage Temperature	-20° to 70° C (-4° to 158° F)
Power Supply	Internal power supply