Configure Switching Information
181
M4100 Series Managed Switch
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser
.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Switching
Multicast MLD Snooping Querier VLAN Configuration.
8. Use VLAN ID to specify the VLAN ID on which MLD snooping querier is administratively
enabled and a VLAN exists in the VLAN database.
9. In the Querier Election Participate Mode list, select Enable or Disable.
This enables or disables the MLD snooping querier participate in election mode. When
this mode is disabled, up on seeing other querier of the same version in the VLAN, the
snooping querier move to non querier state. Only when this mode is enabled, does the
snooping querier participate in querier election in which the lowest IP address wins the
querier election and operates as the querier in that VLAN.
The other querier moves to
non-querier state.
10. In the Querier VLAN
Address field, specify the snooping querier address to be used as the
source address in periodic MLD queries sent on the specified VLAN.
To Next Page
Loading...
Need help?
General
