Manage Device Security
305
M4100 Series Managed Switch
value is 0. Changing the value does not change the configuration until the Submit
button is clicked. Enter 0 to clear the unauthenticated VLAN ID on the interface.
• Supplicant Timeout. This input field allows the user to enter the supplicant time-out
for the selected port. The supplicant time-out is the value, in seconds, of the timer
used by the authenticator state machine on this port to time-out the supplicant. The
supplicant time-out must be a value in the range of 1 to 65535. The default value is
30. Changing the value does not change the configuration until the APPLY button is
clicked.
• Server Timeout. This input field allows the user to enter the server time-out for the
selected port. The server time-out is the value, in seconds, of the timer used by the
authenticator on this port to time-out the authentication server. The server time-out
must be a value in the range of 1 to 65535. The default value is 30. Changing the
value does not change the configuration until the APPLY button is clicked.
• Maximum Requests. This input field allows the user to enter the maximum requests
for the selected port. The maximum requests value is the maximum number of times
the authenticator state machine on this port retransmits an EAPOL EAP
Request/Identity before timing out the supplicant. The maximum requests value must
be in the range of 1 to 10. The default value is 2. Changing the value does not change
the configuration until the APPLY button is clicked.
• PAE Capabilities. This field selects the port access entity (PAE) functionality of the
selected port. Possible values are Authenticator or Supplicant.
• Periodic Reauthentication. This select field allows the user to enable or disable
reauthentication of the supplicant for the specified port. The selectable values are
'enable or disable'. If the value is 'enable' reauthentication occurs. Otherwise,
reauthentication is not allowed. The default value is Disable. Changing the selection
does not change the configuration until the APPLY button is clicked.
• Reauthentication Period. This input field allows the user to enter the reauthentication
period for the selected port. The reauthentication period is the value, in seconds, of
the timer used by the authenticator state machine on this port to determine when
reauthentication of the supplicant takes place. The reauthentication period must be a
value in the range of 1 to 65535. The default value is 3600. Changing the value does
not change the configuration until the APPLY button is clicked.
• User Privileges. This select field allows the user to add the specified user to the list of
users with access to the specified port or all ports.
• Max Users. This field allows the user to enter the maximum number of supplicants on
the specified interface.
10. Click the INITIALIZE button to begin the initialization sequence on the selected port.
This button is clickable only if the control mode is auto. Otherwise, it is grayed out. When
this button is clicked, the action is immediate. Clicking the APPLY button is not required
for the action to occur.
11. Click the REAUTHENTICATE button to begin the reauthentication sequence on the selected
port.
To Next Page
Loading...
Need help?
General
