NETGEAR M4100 Series User Manual

Maintenance
410
M4100 Series Managed Switch
• image1. Select image1 to upload image1.
• image2. Select image2 to upload image2
• CLI Banner. CLI Banner when you want retrieve the CLI banner file.
• Text Configuration. Specify configuration in text mode to retrieve the stored
configuration.
• Script File. The Script file to retrieve the stored configuration.
• Error Log. The Error log to retrieve the system error (persistent) log, sometimes
referred to as the event log.
• Buffered Log. The Buffered Log to retrieve the system buffered (in-memory) log.
• Trap Log. Trap lLg to retrieve the system trap records.
• Tech Support. Tech Support to retrieve the switch information needed for
trouble-shooting.
The factory default is Archive.
9. Use Transfer Mode to specify what protocol to use to transfer the file:
• TFTP. Trivial File Transfer Protocol
• SFTP. Secure File Transfer Protocol
• SCP. Secure Copy Protocol
10. Use Server Address Type to specify either IPv4, IPv6, or DNS to indicate the format of the
Server Address field.
The factory default is IPv4.
11. Use Server Address to enter the IP address of the server in accordance with the format
indicated by the server address type.
The factory default is the IPv4 address 0.0.0.0.
12. Use Remote File Path to enter the path where you want to upload the file.
The file path can include alphabetic, numeric, forward slash, dot, or underscore
characters only. You can enter up to 160 characters. The factory default is blank.
13. Use Remote File Name to enter the name of the file to download from the server.
You can enter up to 32 characters.The factory default is blank.
14. Use Local File Name to specify the local script file name to upload.
This field is visible only when File Type is Script File.
15. Use User Name to enter the user name for remote login to the SFTP/SCP server where the
file is sent.
This field is visible only when the SFTP or SCP transfer mode is selected.
16. Use Password to enter the password for remote login to the SFTP/SCP server where the
file is sent.
This field is visible only when the SFTP or SCP transfer mode is selected.

NETGEAR M4100 Series Specifications

General

Model	M4100 Series
Switch Type	Managed
Form Factor	Rack-mountable
Port Configuration	24 or 48 ports
Ethernet Ports	10/100/1000 Mbps
PoE Support	Available on some models (PoE and PoE+)
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
QoS	Yes
Stackable	Yes
Ports	24 or 48
Jumbo Frame Support	Yes
Security Features	ACL, 802.1X, RADIUS, TACACS+
Operating Temperature	0° to 50° C (32° to 122° F)
Storage Temperature	-20° to 70° C (-4° to 158° F)
Power Supply	Internal power supply