NETGEAR M4100 Series User Manual

Maintenance
414
M4100 Series Managed Switch
• Archive. Specify archive (STK) code to upgrade the operational flash:
• Image1. Specify the code image1 to download.
• Image2. Specify the code image2 to download.
• CLI Banner. Specify CLI Banner when you want a banner to be displayed before the
login prompt.
• Text Configuration. Specify configuration in text mode to update the switch's
configuration.
If the file has errors, the update is stopped.
• Use Config Script to specify the script configuration file.
• Use SSH-1 RSA Key File to specify the SSH-1 Rivest-Shamir-Adleman (RSA) Key
File.
• Use SSH-2 RSA Key PEM File to specify the SSH-2 Rivest-Shamir-Adleman (RSA)
Key File (PEM Encoded).
• Use SSH-2 DSA Key PEM File to specify the SSH-2 Digital Signature Algorithm (DSA)
Key File (PEM Encoded).
• Use SSL Trusted Root Certificate PEM File to specify the SSL Trusted Root
Certificate File (PEM Encoded).
• Use SSL Server Certificate PEM File to specify the SSL Server Certificate File (PEM
Encoded).
• Use SSL DH Weak Encryption Parameter PEM File to specify the SSL Diffie-Hellman
Weak Encryption Parameter File (PEM Encoded).
• Use SSL DH Strong Encryption Parameter PEM File to specify the SSL
Diffie-Hellman Strong Encryption Parameter File (PEM Encoded).
The factory default is Image1.
Note: To download SSH key files, SSH must be administratively disabled
and there can be no active SSH sessions.
Note: To download SSL PEM files SSL must be administratively disabled
and there can be no active SSH sessions.
9. Use Image Name to select one of the images from the list:
• Image1. Specify the code image1 to retrieve.
• Image2. Specify the code image2 t to retrieve.
10. Use Transfer Mode to specify what protocol to use to transfer the file:
• TFTP. Trivial File Transfer Protocol
• SFTP. Secure File Transfer Protocol
• SCP. Secure Copy Protocol
11. Use Server Address Type to specify either IPv4, IPv6, or DNS to indicate the format of the
TFTP/SFTP/SCP Server Address field.

NETGEAR M4100 Series Specifications

General

Model	M4100 Series
Switch Type	Managed
Form Factor	Rack-mountable
Port Configuration	24 or 48 ports
Ethernet Ports	10/100/1000 Mbps
PoE Support	Available on some models (PoE and PoE+)
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
QoS	Yes
Stackable	Yes
Ports	24 or 48
Jumbo Frame Support	Yes
Security Features	ACL, 802.1X, RADIUS, TACACS+
Operating Temperature	0° to 50° C (32° to 122° F)
Storage Temperature	-20° to 70° C (-4° to 158° F)
Power Supply	Internal power supply