NETGEAR M4100 Series User Manual

Default Settings
428
M4100 Series Managed Switch
Auto Install Enabled
Auto Save Disabled
sFlow Enabled
ISDP Enabled (Versions 1 and 2)
RMON Enabled
TACACS Not configured
RADIUS Not configured
SSH/SSL Disabled
Telnet Enabled
Denial of Service Protection Disabled
Dot1x Authentication
(IEEE 802.1X)
Disabled
MAC-Based Port Security All ports are unlocked
Access Control Lists (ACL) None configured
IP Source Guard (IPSG) Disabled
DHCP Snooping Disabled
Dynamic ARP Inspection Disabled
Protected Ports None
Private Groups None
Flow Control Support
(IEEE 802.3x)
Enabled
Head of Line Blocking Prevention Disabled
Maximum Frame Size 1518 bytes
Auto-MDI/MDIX Support Enabled
Auto Negotiation Enabled
Advertised Port Speed Maximum Capacity
Broadcast Storm Control Enabled
Port Mirroring Disabled
LLDP Enabled
LLDP-MED Disabled
Table 106. Factory default settings (continued)
Feature Default

NETGEAR M4100 Series Specifications

General

Model	M4100 Series
Switch Type	Managed
Form Factor	Rack-mountable
Port Configuration	24 or 48 ports
Ethernet Ports	10/100/1000 Mbps
PoE Support	Available on some models (PoE and PoE+)
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
QoS	Yes
Stackable	Yes
Ports	24 or 48
Jumbo Frame Support	Yes
Security Features	ACL, 802.1X, RADIUS, TACACS+
Operating Temperature	0° to 50° C (32° to 122° F)
Storage Temperature	-20° to 70° C (-4° to 158° F)
Power Supply	Internal power supply