NETGEAR M4100 Series User Manual

Configure System Information
48
M4100 Series Managed Switch
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System
 Management  DNS  DNS Configuration.
8. Specify whether to enable or disable the administrative status of the DNS client.
• Enable.
Allow the switch to send DNS queries to a DNS server to resolve a DNS
domain name. The default value is Enable.
• Disable. Prevent the switch from sending DNS queries.
9. Enter the DNS default domain name to include in DNS queries.
When the system is performing a lookup on an unqualified host name, this field is
provided as the domain name (for example, if the default domain name is netgear
.com
and you enter test, then test is changed to test.netgear.com to resolve the name). The
length of the name must not be longer than 255 characters.
10. Use Retry Number to specify the number of times to retry sending DNS queries to the DNS
server
.
This number ranges from 0 to 100. The default value is 2.
11. Use Response T
imeout (secs) to specify the amount of time, in seconds, to wait for a
response to a DNS query.
This time-out ranges from 0 to 3600. The default value is 3.
12. Specify the Source Interface that is used for DNS.
Possible values are as follows:
• Routing interface
• Routing VLAN
• Routing loopback interface

NETGEAR M4100 Series Specifications

General

Model	M4100 Series
Switch Type	Managed
Form Factor	Rack-mountable
Port Configuration	24 or 48 ports
Ethernet Ports	10/100/1000 Mbps
PoE Support	Available on some models (PoE and PoE+)
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
QoS	Yes
Stackable	Yes
Ports	24 or 48
Jumbo Frame Support	Yes
Security Features	ACL, 802.1X, RADIUS, TACACS+
Operating Temperature	0° to 50° C (32° to 122° F)
Storage Temperature	-20° to 70° C (-4° to 158° F)
Power Supply	Internal power supply