GENESYS User Manual Issue 1
SYSTEM
Reboot
Reboots the console.
The progress screen will show how the boot is progressing and which
panels are detected etc.
Restart PC
Shuts down and restarts the PC in the correct manner, and takes you back
to the desktop so you are able to start the Genesys application again.
Shutdown PC
Shuts down the PC in the correct manner.
Whenever turning the system off and removing power, it is vital that the
computer is switched off in the correct manner.
NEVER simply remove the power from the computer!!!
If you have the Show On Reboot option ticked, then this screen will
- 77 -
The system is not
designed to run without
the computer powered-
up and in communication
with the console surface.
To Next Page
Loading...
