Need help?Do you have a question about the Neve Genesys and is the answer not in the manual?
General| Type | Analog Console with Digital Control |
|---|---|
| Channels | 16, 24, 32, 40 |
| EQ | 4-band EQ |
| Busses | 8 subgroups, stereo master bus |
| Digital Connectivity | Optional digital I/O cards |
| Monitoring | Dedicated monitor section |
| Outputs | Main, aux, and bus outputs |
| Digital I/O | AES/EBU, ADAT |
| Power Supply | External power supply |
Describes the connectors and functions of the older style computer cassette.
Describes the connectors and functions of the newer style computer cassette.
Details the 8-channel EQ cassette, its features, and installation.
Details the 8-channel Dynamics cassette, its features, and installation.
Details the 8-channel AD/DA converter cassette, its function, and installation.
Details the Digital Monitoring cassette for digital output of various mixes.
Details the Encore Plus automation package, its features, and hardware requirements.
Explains the Recall package for saving and recalling console states and control positions.
Explains HUI control wiring and setup for OLD type computer cassettes.
Step-by-step guide for powering on the console and associated equipment.
Step-by-step guide for safely powering down the console and computer.
Explains HUI control wiring and setup for NEW type computer cassettes.
Explains how to use SEL Mode on channel strips for setup and configuration.
Explains SEL Mode setup for monitor panel routing and monitoring configurations.
Illustrates and describes a typical recording setup using the Genesys console.
Details a typical mixing setup using the Genesys console and its features.
Explains how Genesys facilitates live recording by addressing FOH mix imbalances.
Describes integrating Genesys with a DAW for HUI control and sub-mixing operations.
Explains how to use SEL Mode for processing element assignment and ordering.
Details how to set Channel and Monitor path feeds to Auxes using SEL Mode.
Details the Reverb Return controls, including level, width, pan, and mono settings.
Allows calibration of console Input and Output paths for trimming signals.
Reboots the console, showing progress and detected panels.
Restarts the PC to the desktop for relaunching the Genesys application.
Shuts down the PC properly, emphasizing the importance of correct shutdown.
To Next Page
