36
After making changes, conrm with the “BACK” or “HOME” keys to x the con-
gured values.
In the previous example, the “WAKE UP DOORMAN” would work daily from
23:00 to 08:00, but it is o. To activate, simply select the desired number of
minutes for the alarm interval. It is also possible to adjust the start and end times
of activation for uninterrupted operation, programming equal hours for “Start”
and “End”.
If you do not want to activate the function, keep the time as “O”.
In operation, messages are shown on the MG3000 display and beeps will be
heard warning the doorman in the last 5 minutes so that he presses the “RESET”
key, which will restart the countdown until the next trip occurs.
Figure 10.6.a
Figure 10.6.b
- ENGLISH -
239
To Next Page
Loading...
